Viking Pump Model GG4195 Cast Iron Gear Pump 4-1062-2231-064
- Note: Contact us for serial number cross reference to model number as well as special job quotes.
- States: GA, NC, SC, TN
- Summary: Viking Pump GG4195 Motor Speed - Port 1" NPT Opposite - Cast Iron Externals - FKM Seals - FlowMin 0 GPM FlowMax 10 GPM - PressureMax 250 PSI - Less Relief Valve
- Series: 495 / 4195 Series Viking Motor Speed Pump
- Type: Motor Speed
- Details
- Series Info
- Industry / Applications
- Resource Links
GG4195 Viking Motor Speed Pump Specifications
Port Size |
1” |
Port Type |
NPT |
Port Orientation |
Opposite |
Externals |
Cast Iron |
Seal Type |
Mechanical Seal |
Seals |
FKM |
Flow Min |
0 GPM |
Flow Max |
10 GPM |
Pres Max |
250 PSI |
Valve |
Less Relief Valve |
Gears Rotor Idler |
Iron / Iron |
Shafts |
Steel |
Idler Pin |
Hardened Steel |
Idler Bushing |
Carbon Graphite |
Shaft Bushings |
Sealed Ball Bearing |
495 / 4195 Series Viking Motor Speed Pump Product Line details
Viking’s Motor Speed Product Line internal gear pumps represent a technological advance in the science of flow. Through new techniques of feeding the rotor and idler, Viking has achieved what was once considered impossible – high flow rates operating at motor speeds.
The largest size (QS) operates at reduced speeds, but still faster than other pumps of similar displacement. Higher speeds mean greater value, with the ability to move more fluid with a smaller pump. It also enables close-coupling to a motor or gearmotor, which eliminates shaft misalignment and results in longer seal and bearing life by preventing wear due to misalignment.
Access these resource files on Viking Pump primary site (will open in new window)