704-844-1100 704-844-1100

Magnatex Mag Drive Pumps

Magnatex Pumps LogoCarotek is the Exclusive distributor for the full line of Magnatex Pumps in Eastern North Carolina, Virginia, Tennessee and Georgia.  Carotek specializes in the MAXP, MP, and MTL Mag Drive Pumps.

Magnatex is an ISO 9001:2015 certified supplier of ANSI, API and sub-ANSI magnetic drive pumps. Magnatex pumps are available in stainless steel, alloy, and fluoropolymer materials to meet the most demanding applications in the process industries.

Magnatex pumps are installed in thousands of plants worldwide handling a wide variety of tough pumping challenges. These pumps handle everything from recovery solvents to heat transfer fluids, viscous liquids, acids, bases, toxic or noxious liquids, and high purity fluids.

Magnatex Pump Products

  • Mag Drive Pumps
  • Variable Speed Drives
  • Corrosion Resistant Baseplates
  • Dry Run Resistant Bearings
  • Pump Protectors
  • PA/PB Assemblies
  • Solids Handling Mag Drive Pumps
  • Pump Flow & Head Matrix

Magnatex magnetic drive pumps are the efficient and dependable choice for medium-flow, medium to high head applications. Pumps' process side conforms to ANSI B73.3 dimensions. Magnatex pumps feature sub-ANSI sizes for efficient lower flow applications. Affordable, top-performing Magnatex pumps give you higher efficiency with lower horsepower and lower total cost of ownership. 

 

Magnatex Mag Drive Pump Models

Magnatex Mag Drive ANSI Pump MAXPMAXP Series - The MAXP Series of pumps has been designed to conform to ANSI B73.3 dimensional standards. The pumps are extremely rugged, which makes them ideal for rigorous duty in the chemical and petrochemical industries.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs
  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required
  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary
  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment
  • Special high-temperature construction is available to handle up to 800°F
  • Options for leak detection are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals
  • Max Flow: 2000 GPM
  • Max Head: 470 Feet

 

Magnatex MPL MHL ANSI Mag Drive PumpsMPL Series/MHL Series - Close coupled, compact, MPL Series pumps are the efficient and dependable choice for medium to high head applications. The process side of the MPL pump conforms to ANSI B73.3 dimensions. Affordable, high performance Magnatex pumps give you higher efficiency with lower first cost, lower horsepower and a lower total cost of ownership.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Optional SiC-X bearing system for enhanced dry running capability
  • Straddle-mounted, double bearing design reduces shaft load and bearing wear when compared to our competitors' typical cantilevered, overhung designs
  • Slip-fit construction allows easy maintenance and on-site repairs with no special tools required
  • Close-coupled configuration eliminates coupling and motor alignment issues
  • Handles toxic, noxious and corrosive liquids for leak-free pumping with increased safety to plant personnel and the environment
  • Optional high temperature construction to handle up to 660°F
  • Optional baffled rear casing design for enhanced solids handling
  • Large internal flow path handles solids: 1% at 500µ; 8% at 100µ
  • MPL Max Flow: 340 GPM
  • MPL Max Head: 400 Feet
  • MHL Max Flow: 300 GPM
  • MHL Max Head: 400 Feet

 

Magnatex MP Series Sub Ansi Mag Drive PumpsMP Series - Close-coupled, compact, MP Series pumps are the efficient and dependable choice for medium-flow, medium-head applications. The MP Series pump features sub-ANSI sizes for efficient lower flow applications. Affordable, high-performance Magnatex® pumps give you higher efficiency with lower horsepower and a lower total cost of ownership.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Standard SiC-X bearing system for enhanced dry running capability
  • Straddle-mounted, double bearing design reduces shaft load and bearing wear when compared to our competitors typical cantilevered, overhung designs
  • Slip-fit construction allows easy maintenance and on-site repairs with no special tools required
  • Large internal flow path handles solids: 1% at 500µ 5% at 100µ.
  • Close-coupled configuration eliminates coupling and motor alignment issues.
  • Handles toxic, noxious and corrosive liquids for leak-free pumping with increased safety to plant personnel and the environment
  • Optional high-temperature construction to handle up to 660°F without cooling liquid
  • Max Flow: 150 GPM
  • Max Head: 190 Feet

 

Magnatex MPT Regenerative PumpMPT Series - MPT Series magnetically driven, sealless, regenerative turbine vane pumps are designed specifically for low NPSH, low flow at high heads. The MPT Series features close coupled construction similar to the MP Series, but uses a regenerative turbine vane impeller. This design provides better pump hydraulics at low flow rates and low NPSHa conditions.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Standard SiC-X bearing system for enhanced dry running capability
  • Straddle-mounted, inner magnet system, with bearings on both sides of the magnet, which reduces shaft and bearing loads when compared to our competitors' overhung, cantilevered inner magnet designs
  • Slip-fit construction that allows easy on-site maintenance, with no special tools or fixtures required
  • Close coupled configuration eliminates coupling and motor alignment issues
  • Handles toxic, noxious and corrosive liquids for leak-free pumping with increased safety to plant personnel and the environment
  • Excellent for pumping entrained gases
  • Excellent for low NPSH applications
  • Max Flow: 40 GPM
  • Max Head: 440 Feet

 

Magnatex MMP 316 SS PumpMMP Series - The MMP Series magnetically driven, sealless, centrifugal pumps are heavy-duty mag-drive pumps with superior SiC-X bearing materials for low flow applications. These close coupled pumps are similar in construction to the MPL/MP Series, except the shaft is stationary and the suction/discharge ports are male NPT with optional flanges available.

The MMP Series pumps are high-quality, dependable, long-lasting pumps utilizing our exclusive straddle bearing design and furnished with the shaft, thrust ring and bushing made of sintered silicon carbide material. Sealless pumps help eliminate "Reportable Release" issues.

All Magnatex pumps and spare parts come with a 1-year unconditional warranty on materials and workmanship.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs
  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required
  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary
  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment
  • Special high-temperature construction is available to handle up to 800°F
  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals
  • Max Flow: 20 GPM
  • Max Head: 95 Feet

 

Magnatex Polypropylene mag drive pumpMEP Series - Magnetic drive, sealless, medium-duty, polypropylene thermoplastic pumps, designed for chemical transfer applications. Simple construction allows for economical first cost and ease of maintenance. Sealless design helps eliminate "Reportable Release" issues.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs
  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required
  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary
  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment
  • Special high-temperature construction is available to handle up to 800°F
  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals
  • GF Polypropylene
  • Max Flow: 108 GPM
  • Max Head: 103 Feet

 

Magnatex MTA PFA Lined Mag Drive PumpMTA Series - Magnatex/Texel MTA Series sealless, mag-drive pumps feature a transfer molded, mechanically attached PFA lining that is thicker and more uniform than our competitors' roto-molded linings. Ideal for almost all industrial chemical applications including high purity and elevated temperature applications, our pumps offer many enhanced characteristics over the competition. MTA Series pumps conform to ANSI B73.3 Standards. Sealless design helps eliminate "Reportable Release" issues.

All Magnatex pumps and spare parts come with a 1-year unconditional warranty on materials and workmanship.

Transfer-compression molding allows positive, interlocking casing linings 5-6 mm thick that stay in place; ideal for vacuum and higher temperature applications.

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs
  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required
  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary
  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment
  • Special high-temperature construction is available to handle up to 800°F
  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals
  • PFA Lined
  • Max Flow: 1,000 GPM
  • Max Head: 285 Feet

 

Magnatex Mag Drive ACID PumpME Series - Magnatex®/Texel® ME Series sub-ANSI pumps are dependable, durable, replaceable liner, magnetic drive pumps. They are the solution for low to medium flow, corrosive fluid applications. These pumps provide a lifetime of maintenance-free operation with low initial cost and low total cost of ownership. Replaceable liners make repairs easy and inexpensive without special tooling required. Sealless design helps eliminate "Reportable Release" issues

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.
  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.
  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs
  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required
  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary
  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment
  • Special high-temperature construction is available to handle up to 800°F
  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals
  • ETFE Lined
  • PVDF Lined
  • Max Flow: 90 GPM
  • Max Head: 140 Feet

Click here to request more information or call us today at 704-844-1100 704-844-1100