704-844-1100 704-844-1100

PumpWorks Industrial | ANSI Pumps

Pump Works LogoCarotek is a stocking distributor for PumpWorks Industrial in NC, SC, GA, VA, and TN.  PumpWorks Industrial manufacturers a wide variety of centrifugal process pumps exceeding ANSI B73.1 standards, ISO requirements and more.  PumpWorks is a leader in providing high quality, short lead time, API 610 pumps.  Their superior ANSI pump line is engineered, manufactured and tested in the USA.  They pride themselves on Price, Quality & Delivery.

PumpWorks Industrial provides as “standard”, features such as Carbon Steel wet ends, Carbon Steel Bearing Housings, 316 ss shafting, and flinger disc splash lubrication, and more – features that other manufacturers consider “options”. Regardless of your fluid processing applications, the PumpWorks Industrial ANSI and Industrial pump product line is capable of handling virtually any pumping needs. 

 ANSI Horizontal Pump Model PWApumpworks ansi pump pwa90

  • ANSI B73.1 end suction, top discharge back pull out process pump.
  • Proven flinger disk lubrication device to ensure effective bearing lubrication. Provides 30% increased bearing L10 life and minimum 15º lower bearing operating temperatures compared to flood oil design.


ANSI Horizontal Low Flow Pump Model PWA-LFpumpworks ansi pump-lf

  • ANSI B73.1 end suction, top discharge back pull out process pump
  • Unique circular casing and radial vane impeller provides stable operation at low flow ANSI conditions.
  • Low flow design utilizes matched circular casing with precisely machined discharge channel and a fully shrouded, radial impeller yielding low flow stability.
  • Impeller balance holes reduce bearing thrust loads for extended bearing life and lower stuffing box pressure for increased seal life.
  • Proven flinger disk lubrication device to ensure effective bearing lubrication. Provides 30% increased bearing L10 life and minimum 15º lower bearing operating temperatures compared to flood oil designPumpWorks PWA-IL

 

Horizontal Self Primer Pump Model PWA-IL

  • ANSI B73.2 In-line process pump. Space saving configuration, lower overall installation cost compared to baseplate mounted pumps.
  • Superior high strength carbon steel motor support with machined registered fit, accommodates vertical C-face NEMA electric motors.
  • Optional carbon steel motor support is available to accommodate IEC motors.

 

ANSI In-Line Process Pump Model PWA-SPpumpworks ansi pump pwa sp

  • Self- Priming process pump is uniquely designed to provide all in one pump priming and air removal without the need for priming devices such as air separator, check valve or external priming equipment.
  • Single component casing with primer and air removal chamber requiring no external priming devices.
  • ANSI B73.1 end suction, top discharge back pull out process pump.
  • Rigid heavy duty shaft and bearing system design, exceeding ANSI B 73.1 bearing life specifications. 316 SS shaft material is standard.
  • Proven flinger disk lubrication device to ensure effective bearing lubrication. Provides 30% increased bearing L10 life and minimum 15º lower bearing operating temperatures compared to flood oil design .

 

NEW PumpWorks Connected Pump Monitor 

PumpWorks, is now offering a connected pump health solution – Predict-Plus®. Based on innovative technology developed by IIoT leader AMI Global, the digital system enables end-users to achieve 24/7 predictive pump insight and control, vibration analytics, long-term storage and access to trend data and the ability to provide just in time service, support and spare parts.PumpWorks Predict Plus Pump Monitor

  • Built-in data logger
  • MODBUS RS485 input / output
  • Periodic data push to Machine Saver Web Portal
  • SMS text message and e-mail notification for alarms
  • LTE Modem
  • Dual antennas for all LTE frequencies
  • 3G HSPA+ fallback
  • FCC Approved radio
  • Dual RS485 (One master and one slave)
  • Dual RS232
  • Two high current digital outputs for driving remote relays
  • Status LED's: Red, Yellow, Green
  • Real-Time Clock with super-capacitor backup
  • Current limited, regulated 12VDC for VTB sensor power (6 typical)
  • Option to power over 250 VTB sensors on a single bus
  • Operating Voltage: 9 to 30VDC (standard)
  • 90VAC to 240VAC (optional)
  • Less than 1 Watt power consumption
  • Protected against ElectrostaticDischarge (ESD) and Radio Frequency Interference (RFI)
  • Temperature Range: -30°C to +70°C (-22°F to +158°F)
  • Weatherproof NEMA4X (IP65) polycarbonate enclosure
  • 140 mm × 105 mm × 65 mm (5.5"X4.3"X2.6")

PumpWorks Industry Applications

  • Chemical/Petrochemical
  • Pulp and Paper
  • Food and Beverage
  • Oil and Gas
  • Primary Metals Manufacturing
  • Mining
  • Power Generation
  • Waste Treatment
  • General Industrial

PumpWorks PWAPumpWorks PWA-SP

According to PumpWorks,  “A full range of In-house performance tests of ANSI pumps with ranges up to 500 HP – variable speed, up to 740 psig at flows of up to 7500 GPM ensures that we can meet and exceed our customer’s expectations. Additionally, with our “Witness Testing” facility, customers can actually witness tests in person, or can virtually watch online through our secure website. All documentation and paperwork is provided for each ANSI pump tested at our facility.”

PumpWorks 5 year warranty

PumpWorks Industrial Products

  • Designed, built and tested in the USA to ANSI and ISO exacting standards.
  • 5 year unconditional bearing frame warranty.
  • Rigid heavy duty shaft and bearing system design, exceeding ANSI B 73.1 bearing life specifications. 316 SS shaft material is standard.
  • High strength carbon steel liquid end provided as standard. We also offer a broad range of corrosive resistant alloy materials – from 316ss to Titanium.
  • PumpWorks also offers In-stock and Custom Made Pump Parts and Aftermarket Service.

 

Click here to Request for Quote or call us today at 704-844-1100 704-844-1100